IJARCCE adheres to the suggestive parameters outlined by the University Grants Commission (UGC) for peer-reviewed journals, upholding high standards of research quality, ethical publishing, and academic excellence.
MOHAMMED YOUSUF KHAN, MASARATH NAYEEM TAYYABA, M.A.RAHEEM, AYESHA SIDDIQUA, SYED SAMEENA Polytechnic College of Moulana Azad National Urdu University, Hyderabad Department of Electronics and Communication Engineering, Muffakham Jah College of Engineering and Technology, Hyderabad
QUOC THE VAN, NGUYEN B.T.NGUYEN, ANH K.T.NGUYEN, HIEN THANH VU, THIEN KHAI TRAN Faculty of Information Technology, Ho Chi Minh City University of Foreign Languages and Information Technology, Ho Chi Minh City, Vietnam
MENAGA.M, R.SUDHA PG scholar, ME-CSE, Gnanamani College of Engineering, Namakkal, T.N, India AP/CSE, Gnanamani College of Engineering, Namakkal, T.N, India
R.JAYAKUMAR, B.SURESH Assistant Professor, Department of Computer Science, Sankara College of Science and Commerce, India Assistant Professor, Department of ECS, Sankara College of Science and Commerce, India
HUSSAIN A.H.AWAD Assistant Professor at the Department of Management Information Systems in KING ABDULAZIZ UNIVERSITY, Faculty of Business – Khulais, Jeddah -Kingdom of Saudi Arabia
V.LEELAVATHY, DR. J.KOMALALAKSHMI Assistant Professor, Department of Computer Science, Angappa College of Arts and Science, Coimbatore Assistant Professor, Department of Computer Science, SNR Sons College, Coimbatore
M.DEEPIKA, R.SUMATHI M.Deepika, PG scholar-(ME-CSE), Gnanamani College of Technology, Namakkal, T.N, India R.Sumathi, AP/CSE, Gnanamani College of Technology, Namakkal, T.N, India
AAYUSHI MAHAJAN, SUHAIB AHMED, SWASTIK GUPTA, ASHISH SURI MTech Student, School of Electronics and Communication Engineering, SMVD University, Katra, India MTech Student, School of Electronics and Communication Engineering, SMVD University, Katra, India Assistant Professor, School of Electronics and Communication Engineering, SMVD University, Katra, India Assistant Professor, School of Electronics and Communication Engineering, SMVD University, Katra, India
SWATI RAMTEKE, KOMAL RAMTEKE, RAJESH DONGARE Student, Department of Computer Engineering, S.K.N. Sinhgad Institute of Technolgy and Science, Pune, India Assistant Professor, Department of Information Technology, Rajiv Gandhi College of Engineering and Research, Nagpur, India Programmer Analyst, ASP-BPI, Cognizant Technology Solutions Pvt. Ltd., Bangalore, India
SRISHTI NANDA, SUKHWINDER SINGH Student, Electronics and Communication Engineering Department, PEC University of Technology, Chandigarh, India Mentor, Assistant Professor, Electronics and Communication Engineering Department, PEC University of Technology, Chandigarh, India
Usha B A, Dr. N K Srinath, Dr. N K Cauvery Aditya Nanjangud, Abhineet M Deshpande, Anthony Rebello Assistant Professor, Department of CSE, R V College of Engineering, Bangalore, India Professor and Dean PG Studies, Department of CSE, R V College of Engineering, Bangalore, India Professor & HOD, Department of ISE, R V College of Engineering, Bangalore, India UG Final Year, Department of Computer Science & Engineering, R V College of Engineering, Bangalore, India
USHA B A, DR. N K SRINATH, ADITYA NANJANGUD, ABHINEET M DESHPANDE, ANTHONY REBELLO Assistant Professor, Department of CSE, R V College of Engineering, Bangalore, India Professor and Dean PG Studies, Department of CSE, R V College of Engineering, Bangalore, India UG Final Year, Department of Computer Science & Engineering, R V College of Engineering, Bangalore, India
SAROJINI MANDAL, J.K.DAS M.Tech Student, School of Electronics, KIIT University, Bhubaneswar, India Assistant Professor, School of Electronics, KIIT University, Bhubaneswar, India
S.REVATHI, DR. A.MALATHI Ph.D. Research Scholar, PG and Research, Department of Computer Science, Government Arts College, Coimbatore, India Assistant Professor, PG and Research, Department of Computer Science, Government Arts College, Coimbatore, India
KIRUTHIGA P, VINOTH KUMAR T Assistant Professor, Computer Science and Engineering, PSNACET, Dindigul, India Assistant Professor, Computer Science and Engineering, RVSCET, Dindigul, India
S.CHAITHANYA SAI SRINIVAS, A.SALIVAHANA REDDY, G.V.SAI YESWANTH, BRAJ BHUSHAN JHA, DHANESHS G KURUP Student, Electronics& Communication Department, Amrita School of Engineering, Bangalore, India Student, Electronics& Communication Department, Amrita School of Engineering, Bangalore, India Student, Electronics& Communication Department, Amrita School of Engineering, Bangalore, India Professor, Electronics& Communication Department, Amrita School of Engineering, Bangalore, India Pr
DR. SACHIN GUPTA, MR. ANAND VYAS Assistant Professor, School of Management, JECRC University, Jaipur, India Research Scholar, School of Management, JECRC University, Jaipur, India
MANAS M N, NAGALAKSHMI C K, SHOBHA G MTech, Computer Science & Engineering, RVCE, Bangalore, India MTech, Computer Science & Engineering, RVCE, Bangalore, India Professor & HOD, Computer Science & Engineering, RVCE, Bangalore, India
SACHIN D JOSHI, ANISHA B S, RAJAVARDHAN BHAT M.Tech IT, ISE Department, RVCE, Bangalore Assistant Professor, ISE Department, RVCE, Bangalore Member of Technical Staff, R&D, VMware Inc, Bangalore
TANVIRA ISMAIL, DEVOLEENA DAS, JYOTIRMOY SAIKIA, JYOTIRMOY DEKA, RAJKUMAR SARMA Assistant Professor, Department of ECE, Don Bosco College Of Engineering & Technology, Guwahati, India B.Tech Student, Department of ECE, Don Bosco College Of Engineering & Technology, Guwahati, India Assam Don Bosco University
TANVIRA ISMAIL, DIPESH KARKI, ZOHIR MOLLICK, SAGARDAS, MANOJ DEKA Assistant Professor, Department of ECE, Don Bosco College of Engineering and Technology, Guwahati, India B.Tech Student, Department of ECE, Don Bosco College of Engineering and Technology, Guwahati, India Assam Don Bosco University
SHUBHANGI RASTOGI, SAMIR SRIVASTAVA M.Tech Student, Computer Science and Engineering, KNIT, Sultanpur, India Associate Professor, Computer Science and Engineering, KNIT, Sultanpur, India
B.SIVARANJANI, V.VINODHINI, P.MENAKA, V.S.JAGADEESWARAN, P.PRASEETHAN Assistant Professor, Dept of IT, Dr. N.G.P College of Arts and Science, Coimbatore, India Assistant Professor, Dept of IT, Dr. N.G.P College of Arts and Science, Coimbatore, India Assistant Professor, Dept of IT, Dr. N.G.P College of Arts and Science, Coimbatore, India Assistant Professor, Dept of IT, Dr. N.G.P College of Arts and Science, Coimbatore, India Assistant Professor, Dept of IT, Dr. N.G.P College of Arts and Science
SELVAKUMAR.V, AJAY.V.P PG Scholar, M.E.,VLSI DESIGN, KPR Institute Of Engineering And Technology, Coimbatore, India Assistant Professor, ECE Department, KPR Institute Of Engineering And Technology, Coimbatore, India
KIRAN DESHMUKH, AARTI BHAGURE, PROF. ZAFAR UL HASAN, PROF. ANIL R.AUTI, PROF. YOGESH R NAGARGOJE Student, CSE Department, Savitribai Phule Womens Engineering College, Aurangabad, India Student, CSE Department, Savitribai Phule Womens Engineering College, Aurangabad, India Assistant Professor, Department of Computer, SITRC Nashik, India Assistant Professor, Department of Computer, Dr. Seema Quadri Institute of Tech, Aurangabad, India Assistant Professor, CSE Department, Savitribai Phule Womens En
MOHD JAFFER ALI, MOHD SAIFUDDIN ASHRAF, MOHD SHAHRUKH KHAN, J PRASANTH KUMAR, M.A.RAHEEM Department of Electronics and Communication Engineering, Muffakham Jah College of Engineering and Technology, Hyderabad, India
SWATI ATRI, DR. NASIB SINGH GILL, JAIDEEP ATRI M.Tech., Department of Computer science and Application, MDU, Rohtak, India Professor, Department of Computer Science and Application, MDU, Rohtak, India Research Scholar, Department of Computer Science and Application, KU, Kurukshetra, India
TRILOK GUPTA, ARCHANA SHARMA Pacific Academy of Higher Education and Research University, Udaipur, Rajasthan-India, Associate Professor, Department of Computer Science, Gurukul Institute of Engineering & Techchnology Institutional Area, Ranpur, Kota, Rajasthan-India
MOHAMMED ABDUL KHALEEL, SATEESH KUMAR PRADHAN, G.N.DASH Research Scholar, Sambalpur University, India Post Graduate department of Computer Science, Utkal University, India Post Graduate, Department of Physics, Sambalpur University, India
DEEPAK KUMAR, ANURAG JOLLY, S. NANDA KUMAR B.Tech Student, Electronics and Communication VIT University, Vellore, India B.Tech Student, Electronics and Communication VIT University, Vellore, India Asst. Professor (Sr), Electronics and Communication VIT University, Vellore, India
AVIPSA S.PANDA, GANESH L.K.MOGANTI Student, School of Electronics, KIIT University, Bhubaneswar, India Asst. Prof., School of Electronics, KIIT University, Bhubaneswar, India
POONAM MANDAVKAR, GAURI PATIL, CHETNA SHETTY, VISHAL PARKAR Student, Computer, Rajendra Mane College of Engineering &Technology, Ambav, India Student, Computer, Rajendra Mane College of Engineering &Technology, Ambav, India Student, Computer, Rajendra Mane College of Engineering &Technology, Ambav, India Assistant Professor, Computer, Rajendra Mane College of Engineering &Technology, Ambav, India
MEERA K, MANU G THOMAS M. Tech Student Computer Science, Jawaharlal College of Engineering and Technology, Calicut University, India M.E, Computer Science and Engineering, Annamalai University, Chidambaram, India
DIVYA K, NISHA D, SURYA M PG Student, ECE Department, Sriguru Institute of Technology, Coimbatore, India PG Student, ECE Department, Sriguru Institute of Technology, Coimbatore, India Assistant Professor, ECE Department, Sriguru Institute of Technology, Coimbatore, India
DR. S.VIJAYARANI, MS. P.JOTHI Assistant Professor, Department of Computer Science, School of Computer Science and Engineering, Bharathiar University, Coimbatore, Tamilnadu, India M.Phil Research Scholar, Department of Computer Science, School of Computer Science and Engineering, Bharathiar University, Coimbatore, Tamilnadu, India
PAMPA DEBNATH, SOHINI PAL, AMRITA MAITY, RIYA BHATTACHARYYA, KRISHNA MAHATO Assistant Professor, Department of Electronics & Communication Engineering, RCCIIT, Kolkata, India Student, Department of Electronics & Communication Engineering, RCCIIT, Kolkata, India Student, Department of Electronics & Communication Engineering, RCCIIT, Kolkata, India Student, Department of Electronics & Communication Engineering, RCCIIT, Kolkata, India Student, Department of Electronics & Communi
JITENDRA PRAKASH SHREEMUKH, PROF. (DR.) B.S.RAI Department of Electronics and Communication Engineering , Madan Mohan Malaviya University of Technology, Gorakhpur, India
N.SANGEETHA, K.P.NITHIN, M.AAKASH Assistant Professor, ECE, VIT University, Vellore, India Student, ECE, VIT University, Vellore, India Student, ECE, VIT University, Vellore, India
AVANTIKA SINGH, SUKHWINDER SINGH Student, Electronics and Communication Engineering Department, PEC University of Technology, Chandigarh, India Mentor, Assistant Professor, Electronics and Communication Engineering Department, PEC University of Technology, Chandigarh, India
GARIMA ARORA, SANJEEV DEWRA M. Tech Scholar, Department of ECE, Shaheed Bhagat Singh State Technical Campus, Ferozepur, India Assistant professor & Head of ECE Department, Shaheed Bhagat Singh State Technical Campus, Ferozepur, India
TONDARE S.M, PANCHAL S.D, KUSHNURE D.T Assistant Professor, Electronics and Telecom Dept., Sandipani Technical Campus Faculty of Engg, Latur(MS), India Assistant Professor, Electronics and Telecom Dept., Sandipani Technical Campus Faculty of Engg, Latur(MS), India Assistant Professor, Electronics and Telecom Department, VPCOE, Baramati(MS), India
LAKSHMI DEVASENA C Assistant Professor, Operations & IT, IBS Hyderabad, IFHE University, Hyderabad, India
|
Abstract
Image Enhancement and Hardware Implementation of Edge Detected Vascular Images Using Simulink Model
MOHAMMED YOUSUF KHAN, MASARATH NAYEEM TAYYABA, M.A.RAHEEM, AYESHA SIDDIQUA, SYED SAMEENA Polytechnic College of Moulana Azad National Urdu University, Hyderabad Department of Electronics and Communication Engineering, Muffakham Jah College of Engineering and Technology, Hyderabad
Abstract: Vascular Imaging is a key component in comprehensive stroke diagnosis. Aiming at the complex background of vascular images, weak contrast between the vessels and the background, a new vascular enhancement method based on classical image processing techniques is proposed. The problem in Canny’s hysteresis thresholding method having two threshold values which yielded low performance in localization and noise rejection has been overcome with a not complicated and accurate algorithm. In this paper an efficient image enhancement algorithm i.e., pre processing, contrast adjustment and edge abstraction is implemented on Spartan -3 FPGA using Simulink model which comprises of Simulink blocks and Xilinx blocks. Accurate and faster results are obtained by interfacing with Matlab and XSG through the workspace of Matlab.
Vietnamese Speech Processing and Synthesis in VNSExpenses System
QUOC THE VAN, NGUYEN B.T.NGUYEN, ANH K.T.NGUYEN, HIEN THANH VU, THIEN KHAI TRAN Faculty of Information Technology, Ho Chi Minh City University of Foreign Languages and Information Technology, Ho Chi Minh City, Vietnam
Abstract: This paper presents the Vietnamese speech processing task in VNSExpenses system, a tool able to understand users‟ voice commands, would help users with managing and querying their personal expenses by Vietnamese speech. In this system, we use HTK toolkit for speech recognition and Unit Selection method for synthesis operations. Having been built and tested in PC environment, our system proves its accuracy attaining more than 95%.
Energy Efficient Approach for Mobile Data Gathering In Wireless Sensor Networks
MENAGA.M, R.SUDHA PG scholar, ME-CSE, Gnanamani College of Engineering, Namakkal, T.N, India AP/CSE, Gnanamani College of Engineering, Namakkal, T.N, India
Abstract: Energy consumption becomes a main concern in a Wireless Sensor Network. Wireless sensor network (WSN) requires robust and energy efficient communication protocols to minimize the energy consumption as much as possible. In this project, the investigation of the impact of outlying sensor readings and broken links on high-fidelity data gathering is carried out, and propose Compressive sensing Theory based bounded relay hop mobile data gathering (CST-BRH) approaches, Here a subset of sensors will be selected as polling points that buffer locally aggregated data and upload the data to the mobile collector when it arrives. It also identify outlying sensor readings and derive the corresponding accurate values, and to infer broken links. The proposed design is validated by an extensive simulation study, and the results indicate that CST-BRH method is superior over traditional in-network data compression techniques for practical sensor network settings. This analyze the trade-off between energy saving and data gathering latency in mobile data gathering.
Optimizing and Content Management System Using Indexing
MANISHA VERMA, RAJESH SINGH, PRABHAT KUMAR M.Tech (Scholar), CSE Department, BSACET, Mathura, India Assistant Professor, CSE Department, BSACET, Mathura, India M.Tech (CSE), Shobhit University, Meerut, India
Abstract: The core function and use of content management systems is to present information on websites. CMS features vary widely from system to system. Simple systems showcase a handful of features, while other releases notably enterprise systems offer more complex and powerful functions. Most CMS include Web-based publishing, format Management, revision control (version control), indexing, searching and information retrieval. An additional feature is indexing, search, and retrieval. A CMS system indexes all data within an organization. Individuals can then search for data using keywords, which the CMS system retrieves. A CMS system also provides tools for one-to-one marketing that provides an ability to a website to tailor its content and advertising to a user‟s specific characteristics using information provided by the user or gathered by the site (for example, a particular user‟s page sequence pattern).The CMS increments the version number when new updates are added to an already-existing file. A CMS may serve as a central repository containing documents, movies, pictures, phone numbers, and scientific data. CMS can be used for storing, controlling, revising, semantically enriching and publishing documentation
Keywords: Content Management System, File Transfer Protocol, version control, HTML, Portable Document Format, Database, Web Content Management System, Web pages.
R.JAYAKUMAR, B.SURESH Assistant Professor, Department of Computer Science, Sankara College of Science and Commerce, India Assistant Professor, Department of ECS, Sankara College of Science and Commerce, India
Abstract: Edge detection is one of the most frequently used operations in image analysis, and there are possibly more methods and algorithms in the literature for detecting edges than any other single subject. The reason for this is that edges form the outline of an object. An edge is the boundary between an object and the background, and indicates the boundary between overlapping objects. For this paper we compare different edge detections methods using Remote Sensing images.
One ERP system for twenty five universities An empirical investigation for development ERP private cloud Kingdom of Saudi Arabia universities case
HUSSAIN A.H.AWAD Assistant Professor at the Department of Management Information Systems in KING ABDULAZIZ UNIVERSITY, Faculty of Business – Khulais, Jeddah -Kingdom of Saudi Arabia
Abstract: The governments spend a lot of money on Educational Enterprise recourse Planning [EERP] systems development to manage their universities business processes more readably. It may exceed the cost for one system to any university about 20 million dollars, [9] these systems are one of the university`s competitive advantages that governments must make available. In this study; researcher tries to explain how governments can provide enterprise systems services in all their universities in a manner of less cost and more secure through using the ERP private Cloud.
Keywords: Educational Enterprise recourse Planning [EERP], Private cloud, public cloud, university processes.
A Survey on Finding Faults of Interlayer Gaps and Lift-Off in Aircrafts Using Automated Classification Method in PEC
V.LEELAVATHY, DR. J.KOMALALAKSHMI Assistant Professor, Department of Computer Science, Angappa College of Arts and Science, Coimbatore Assistant Professor, Department of Computer Science, SNR Sons College, Coimbatore
Abstract: Today it is very important to provide more security to the aircraft in the multi-layer structure of PEC. They were requires extreme skilled workers and the outcomes are usually partial one from the workers. Lift-off effects and air gaps between interlayer are the main difficult in eddy current fault of multilayer structure. Therefore automated fault classification in multi layer structure is one of the required and also tough one. Nowadays researchers have interested on automated fault finding of PEC in aircraft method. This paper includes an overview of PEC and introduces the reader to some fundamental concepts of aircraft methodology of PEC. Also, we emphasizes classification algorithm to implement automated fault classification such as SVM, PCA, Neural Classifiers, etc.
Keywords: PEC Aircrafts, Air gaps, SVM, PCA, Neural classifiers.
To Manage A Scalable Distributed System Using Dynamic Configuration
M.DEEPIKA, R.SUMATHI M.Deepika, PG scholar-(ME-CSE), Gnanamani College of Technology, Namakkal, T.N, India R.Sumathi, AP/CSE, Gnanamani College of Technology, Namakkal, T.N, India
Abstract: This paper presents a solution for distributed system that must preserve critical state in spite of malicious attacks and Byzantine failures. In an existing Byzantine replication protocols satisfy the runtime performance. There have been proposals for dynamic replication protocols that tolerate crash failures and provide an efficient runtime performance. We present a new Byzantine fault-tolerant replication protocol that meets the new correctness criterion and evaluate its performance in fault-free execution and when under attack.
Keywords: Byzantine fault-tolerance, distributed system, storage system, system membership.
Comparative Analysis of Different Data Dissemination Strategies in Wireless Sensor Networks
AAYUSHI MAHAJAN, SUHAIB AHMED, SWASTIK GUPTA, ASHISH SURI MTech Student, School of Electronics and Communication Engineering, SMVD University, Katra, India MTech Student, School of Electronics and Communication Engineering, SMVD University, Katra, India Assistant Professor, School of Electronics and Communication Engineering, SMVD University, Katra, India Assistant Professor, School of Electronics and Communication Engineering, SMVD University, Katra, India
Abstract: Wireless sensor nodes are uniquely suited for monitoring environmental events owing to certain advantages like small size, wireless nature. However, their usage is restricted by only one engineering limitation i.e. short lifetime. There is always a need of an efficient architecture tailored towards enhancing network lifetime which strongly depends on Data Dissemination strategy used. Data Dissemination is the dissemination of the monitored information, the tasks that sensors are supposed to perform and report to the sink. So it is an important issue to design suitable Data Dissemination protocol according to different application scenarios. A variety of different energy efficient Data Dissemination protocols are proposed in recent years. However there is little comparative study of different Data Dissemination strategies available. In this paper, we present the comprehensive analysis of various Data Dissemination strategies. This paper provides useful insights for the network designer such as which Data Dissemination protocols scale well, reduce overall energy consumption or improve task completion.
Keywords: Wireless Sensor Network, Data Dissemination, Pull based strategy, Push based strategy, Push-Pull based strategy.
Lexicon Parser for syntactic and semantic analysis of Devanagari sentence using Hindi wordnet
SWATI RAMTEKE, KOMAL RAMTEKE, RAJESH DONGARE Student, Department of Computer Engineering, S.K.N. Sinhgad Institute of Technolgy and Science, Pune, India Assistant Professor, Department of Information Technology, Rajiv Gandhi College of Engineering and Research, Nagpur, India Programmer Analyst, ASP-BPI, Cognizant Technology Solutions Pvt. Ltd., Bangalore, India
Abstract: The rule based approach used to developing lexicon parser rule, this approach uses the rules and a lexicon to resolve the word ambiguity. It developed for English, Sindhi and Chinese languages. In this paper we developed, Lexicon parser for syntactic and semantics analysis of Devanagari script sentence by using Hindi wordnet. The rule based parser generates a parse tree that is generated by using semantic relationship. In the given Devanagari (Hindi) sentence, the parser identifies grammatical meaning of the words. Testing is performed with new 150 sentences and accuracy at different levels is calculated. The accuracy of 89.33% was achieved from Lexicon parser.
Keywords: Rule based approach, Lexicon Parser, Hindi Wordnet
SRISHTI NANDA, SUKHWINDER SINGH Student, Electronics and Communication Engineering Department, PEC University of Technology, Chandigarh, India Mentor, Assistant Professor, Electronics and Communication Engineering Department, PEC University of Technology, Chandigarh, India
Abstract: Ad hoc networks are peer networks of mobile computational nodes. They are well explored in the contexts of sensor networks, habitat monitoring and robotic collaboration. Recently, ad hoc networks have elicited increasing interest as flexible distributed application environments. Today, many people carry numerous portable devices, such as laptops, mobile phones, PDAs (personal digital assistant) and mp3 players, for use in their professional and private lives. For the most part, these devices are used separately ie. their applications do not interact. Ad hoc wireless communication between devices might be loosely defined as a scheme, often referred to as ad hoc networking, which allows devices to establish communication, anytime and anywhere without the aid of a central infrastructure. In this article, the concept of mobile ad hoc networking along with its applications that can be envisoned are being described. Ad hoc networking covers a broad swath of situations. An ad hoc network might consist of several home-computing devices, plus a notebook computer that must exist on home and office networks without extra administrative work[I]. Such a network might also need to exist when the people and equipment in normally unrelated military units need to work together in combat.
Keywords: networking, ad hoc, bluetooth, communication, wireless, routing.
A Survey on Secure and High Capacity Image Steganography Techniques
Usha B A, Dr. N K Srinath, Dr. N K Cauvery Aditya Nanjangud, Abhineet M Deshpande, Anthony Rebello Assistant Professor, Department of CSE, R V College of Engineering, Bangalore, India Professor and Dean PG Studies, Department of CSE, R V College of Engineering, Bangalore, India Professor & HOD, Department of ISE, R V College of Engineering, Bangalore, India UG Final Year, Department of Computer Science & Engineering, R V College of Engineering, Bangalore, India
Abstract: Steganography is the art of hiding data in plain sight. It is the science of “invisible” communication. In image steganography the embedding of data is done such that the Human Visual Syaytem(HVS) does not recognize that the image has a hidden message in it. A trade-off between security and capacity is often made in standard of steganographic techniques. In this paper some more Secure and High Capacity Image Steganography Techniques to explore their potentials and limitations are presented
Keywords: Secure, DWT, IWT, BPCS, information-hiding, image processing, high capacity
A Survey on Patient Information Protection Using Cryptographic and Data Hiding Techniques
USHA B A, DR. N K SRINATH, ADITYA NANJANGUD, ABHINEET M DESHPANDE, ANTHONY REBELLO Assistant Professor, Department of CSE, R V College of Engineering, Bangalore, India Professor and Dean PG Studies, Department of CSE, R V College of Engineering, Bangalore, India UG Final Year, Department of Computer Science & Engineering, R V College of Engineering, Bangalore, India
Abstract: This paper describes the need to protect patient information in digital form and some of the methods that exist to do so. The methods described utilize cryptographic and data hiding concepts, which are explained in brief. The paper summarizes the basic functionality a patient information protection system must offer and explains the basic methodology adopted in most of the existing methods.
Keywords: Patient information protection, reversible data hiding, patient privacy, tele-medicine.
Improving the quality of Service of EDCF over DCF For Real Time Applications Using Probability Algorithm
HARPREET SINGH, TARUNDEEP SINGH, MANPREET KAUR
Abstract: IEEE 802.11 (802.11) WLAN standard is being accepted widely and rapidly for many different environments today Main characteristics of the 802.11 networks are their simplicity and robustness against failures due to the distributed approach. They are created and maintained by the IEEE LAN/MAN Standards Committee (IEEE 802). Quality of Service (QoS) support is the key for multimedia applications over WLAN. So, since the demand for QoS is nowadays is a topic of great concern for the transmission of the different services like video, voice, best-effort services controlling the maximum network applications, background services for which the priority assigned is lower than the one assigned to the standard. So in order to get the better Qos at our desired application we need to control the network parameters in such a way that we get a certain output and according to the output we will see that at which station we are getting the maximum output. And at that station we will send the access category at which we want the best output Qos. So, we have resolved this problem of attaining the good Qos at our desired station by giving the random values for the contention window and the arbitrary interframe spaces is done by calculating the probability of winning and the probability of collisions. Due to the increasing demand of high rates WLANS in the applications like video streaming and voice over IP. It's mandatory to improve its performance in every possible way for the ease of the user. To calculate the probability of winning of a station for random values of AIFS and CW using the proposed algorithm and to find out the probability of the collisions in a station for the random values of AIFS and CW using the proposed algorithm and also to analyze the result and check where the output coming better. Then the station at which we are getting the maximum output we will send that data for which we want the best QOS.
Keywords: QoS, SINR, MAC delay, RSSI downlink (DL) and uplink (UL), handoff, cellular communications
SAROJINI MANDAL, J.K.DAS M.Tech Student, School of Electronics, KIIT University, Bhubaneswar, India Assistant Professor, School of Electronics, KIIT University, Bhubaneswar, India
Abstract: Analog –to-digital converter is an important device has a huge application in todays digitized world. Flash converter is high speed converter among all other ADCs. It consists of 2N comparators that provide thermometer coded ouput which is converted to a digital output by an encoder. In high speed ADCs comparator plays an important role for high speed application using minimization techniques. The main disadvantage of flash type ADC is power hungry so the aim is to design low power flash type ADC with low power comparator. The design issues are related to gain, phase, gain bandwidth, resolution, speed, area and power dissipation. Simple two stage opamp with miller capacitance can be used as a high gain comparator. It can be easily operated at low power. It is simulated in 180nm technology using cadence virtuoso analog design environment simulation. The op-amp uses a 1.8volt Vdd and a -1.8volt Vss and consumes a power of around 0.9mW (as per post layout simulations). The analog output of each comparator is encoded using cascading full adder designed by pass transistor logic that makes the circuit more faster.
Keywords: string of pmos load, Two stage amplifier, miller capacitance, full adders.
Detecting User-To-Root (U2R) Attacks Based on Various Machine Learning Techniques
S.REVATHI, DR. A.MALATHI Ph.D. Research Scholar, PG and Research, Department of Computer Science, Government Arts College, Coimbatore, India Assistant Professor, PG and Research, Department of Computer Science, Government Arts College, Coimbatore, India
Abstract: Intrusion detection mainly focused on four major attack category such as denial of service, probe, user-to- root, and remote-to-local. This paper focused on user-to-root attack, which the attacker tries to access normal user account and gains root access information of the system. The U2R attacks leads to several vulnerability such as sniffing password, a dictionary attack and social engineering attacks. This paper makes a comparative study analyses for U2R attacks based on several popular machine learning techniques such as navie bayes, random forest, J48, random tree, JRIP and Multilayer perceptron to achieve better accuracy and to reduce mean square error for individual attacks that belongs to user to root category.
Keyword: Intrusion detection, User-to-Root attack, Random Forest, Multilayer perception, J48
Green Computing – An Ecofriendly Approach for Energy Efficiency and Minimizing E-Waste
KIRUTHIGA P, VINOTH KUMAR T Assistant Professor, Computer Science and Engineering, PSNACET, Dindigul, India Assistant Professor, Computer Science and Engineering, RVSCET, Dindigul, India
Abstract: The need for environmentally friendly computing gadgets and energy saving devices, under the auspices of „Green Computing‟ has become a global phenomenon with the aim to reduce environmental decadence that emanates from abuse and the rising threat of global warming. . “Green computing” represents environmentally responsible way to reduce power and environmental e-waste. Green computing is the practice of using computing resources efficiently. The goals are to reduce the use of hazardous materials, maximize energy efficiency during the product's lifetime, and promote recyclability or biodegradability of defunct products and factory waste. It‟s known that as the economy expands, the demand for computing devices rises as business and individuals seek faster way of doing things –„‟The Computing way‟‟. Information technological devices are upgraded rapidly due to the need for speed, flexibility, simplicity and cost effectiveness; thus outdating the previous technology. Hence we need to implement energy-efficient central processing units (CPUs), servers and peripherals with reduced resource consumption and proper disposal of electronic waste (e-waste).
Keywords: Green computing, ICT, Computing, e-waste, EPEAT
EPCglobal Gen-2 RFID Tag to Reader Communication Simulation Using GNU Radio
S.CHAITHANYA SAI SRINIVAS, A.SALIVAHANA REDDY, G.V.SAI YESWANTH, BRAJ BHUSHAN JHA, DHANESHS G KURUP Student, Electronics& Communication Department, Amrita School of Engineering, Bangalore, India Student, Electronics& Communication Department, Amrita School of Engineering, Bangalore, India Student, Electronics& Communication Department, Amrita School of Engineering, Bangalore, India Professor, Electronics& Communication Department, Amrita School of Engineering, Bangalore, India Pr
Abstract: RFID is a revolutionary step in wireless technology, which can be deployed for identification and tracking of objects. This technology is complex and expensive, but decrease in cost of VLSI components gives a pathway to this technology into developing countries. In RFID, the communication takes place between the tags to the reader and vice versa. In this paper, we simulated the tag to reader communication of an EPCglobal Gen-2 RFID system with the aid of GNU Radio, a free software development toolkit that provides the signal processing runtime and processing blocks to implement software radios using readily-available, low-cost external RF hardware.
Keywords: RFID, GNU Radio, EPCglobal standard, Readers, Tags
Benefits and Drawbacks of M-Commerce in India A Review
DR. SACHIN GUPTA, MR. ANAND VYAS Assistant Professor, School of Management, JECRC University, Jaipur, India Research Scholar, School of Management, JECRC University, Jaipur, India
Abstract: The purpose of this research paper is to identify factors affecting the adoption of M-commerce. The significant growth of M-commerce application is remarkable in India. More and more consumer is transferring to M- commerce to achieve better and fast transaction into market. M-commerce is complex in nature and includes changing procedure in market. M-commerce is emerging level in India. The astounding rate growth in mobile penetration in India, higher mobile technology and networking is coming day by day. Now a mobile phone is not only use for text SMS or phone call but also be used for many other activities like browsing of internet chatting or other virtual activities .This research paper identifies the factors affecting the adoption of M-commerce. This paper‟s theoretical contribution is to explain the „How‟s M-commerce is developing in India and to identify clear contexts and assistant mechanism.
Cloud Computing Security Issues and Methods to Overcome
MANAS M N, NAGALAKSHMI C K, SHOBHA G MTech, Computer Science & Engineering, RVCE, Bangalore, India MTech, Computer Science & Engineering, RVCE, Bangalore, India Professor & HOD, Computer Science & Engineering, RVCE, Bangalore, India
Abstract: Cloud computing is a technology which satisfies customers dynamic resource demands and makes the job easier to work on all platforms for the user. Cloud computing is the delivery of computing services over the Internet. Security is the main criteria when working on cloud, as the third party involvement will be there. Secure architecture should be used to provide services through the cloud. The extensive use of virtualization in implementing cloud infrastructure brings unique security concerns for customers or tenants of a public cloud service. Virtualization alters the relationship between the OS and underlying hardware - be it computing, storage or even networking.Methods show how to overcome the security issues of the cloud.
Keywords: Cloud Computing, Virtualization, Multi Tenant, Scalable.
VAnalyser vSphere Analysis and Recommendation Tool
SACHIN D JOSHI, ANISHA B S, RAJAVARDHAN BHAT M.Tech IT, ISE Department, RVCE, Bangalore Assistant Professor, ISE Department, RVCE, Bangalore Member of Technical Staff, R&D, VMware Inc, Bangalore
Abstract: In the current era of huge datacenters opting for Virtual infrastructure, vSphere provides a vast array of features which makes virtualization very effective and flexible. Major challenge ahead of vSphere administrators is to analyse the capabilities of each ESXi hosts in datacenter and to find out the server which is capable to run a specific vSphere feature. This paper proposes a utility 'vAnalyser' to scan the servers in vSphere datacenter and generate a 'feature to server' compatibility matrix. Datacenter Administrator can refer to this compatibility matrix and quickly identify the server(s) which fulfil the requirements to use a vSphere feature. Currently users do not have such a tool to get a consolidated report to analyse vSphere features usable on a server. For example , Administrators want to know the servers in datacenter on which they can deploy a Virtual Machine of size more than 2TB or list of servers in datacenter between which vMotion is possible. Report generated by vAnalyser answers these queries of feature compatibility requirements. This tool can even be used by vSphere testers to identify servers with desired capabilities to test a specific vSphere feature. The tool will use VMware vSphere Management SDK to trace through the datacenter and prepare the matrix. We show the approach in which data can be fetched from datacenters and presented using an elementary prototype.
Technology Implementation of Computer Hardware in the Virtual Machines
DR. OSAMA AHMAD SALIM SAFARINI Computer Engineering Department, University of Tabuk, Tabuk, KSA
Abstract: This article deals with designing methods and interfaces for virtual devices and implementing these devices in the virtual machine (computer). The analysis of the functions performed by the virtual device, and on the basis of that analysis is generated a list of operations of virtual device interface. The purpose of this article is identification of the main features of the implementation and operation of computer hardware in the virtual machine.
TANVIRA ISMAIL, DEVOLEENA DAS, JYOTIRMOY SAIKIA, JYOTIRMOY DEKA, RAJKUMAR SARMA Assistant Professor, Department of ECE, Don Bosco College Of Engineering & Technology, Guwahati, India B.Tech Student, Department of ECE, Don Bosco College Of Engineering & Technology, Guwahati, India Assam Don Bosco University
Abstract: The leakage of dangerousand flammable gas like LPG in cars, service stations, households and in storage tanks can bedetected using the gas sensor unit. This unit can be easily integrated into aunit that can sound an alarm. The sensor has great sensitivity and rapid response time. This sensor can also beused to sense other gases like iso-butane, propane and even cigarette smoke. The output of the sensor goes LOW as soon as the sensor senses any gas leakage in the atmosphere. This is detected by the microcontroller and buzzer is turned on. After a delay of few milliseconds, the exhaust fan is also turned on for throwing the gas out and the main power supply is turned off. A message ‗LEAKAGE‘ is sent to a mobile number that is predefined.
Keywords: MQ6 (gas sensor), GSM module, GSM network, Short message service, LPG gas
TANVIRA ISMAIL, DIPESH KARKI, ZOHIR MOLLICK, SAGARDAS, MANOJ DEKA Assistant Professor, Department of ECE, Don Bosco College of Engineering and Technology, Guwahati, India B.Tech Student, Department of ECE, Don Bosco College of Engineering and Technology, Guwahati, India Assam Don Bosco University
Abstract: Remote power distribution system using GSM aims to design and implement efficient and cost effective solution for replacing the manual process of power cut/load shedding from a centralized location. It consists of two GSM modems, one at the control station and the other one connected to the transformer from where the electricity is divided into certain branches in an area. Here the control station modem utilizes GSM network to turn a branch line of a transformer either on/off. It also consists of a LCD display which displays the state of the channel/branches of the transformer as either on/off. In case of network failure, a set of manual switches are also there to turn on/off the channels manually. Electromagnetic relays are used as circuit breakers.
Keywords: GSM, Digital Power Meter, LCD, Short Messaging Service (SMS), Transformer.
Comparison Analysis of Different Queuing Mechanisms Droptail, RED and NLRED in Dumb-bell Topology
SHUBHANGI RASTOGI, SAMIR SRIVASTAVA M.Tech Student, Computer Science and Engineering, KNIT, Sultanpur, India Associate Professor, Computer Science and Engineering, KNIT, Sultanpur, India
Abstract: Congestion is one of the major problems in today’s internet. So for managing traffic and to keep the network stable, Congestion Control algorithms are used. Queuing is one of the important method in traffic management system. This paper gives a comparative analysis of three queuing mechanisms Droptail, Random Early Detection and Non Linear Random Early Detection on the basis of various performance parameters like throughput and packet drop. The simulation results show that NLRED has a superior quality than other mechanisms.
Identify and Destroy Cancer Cells Using Nano Technology
B.SIVARANJANI, V.VINODHINI, P.MENAKA, V.S.JAGADEESWARAN, P.PRASEETHAN Assistant Professor, Dept of IT, Dr. N.G.P College of Arts and Science, Coimbatore, India Assistant Professor, Dept of IT, Dr. N.G.P College of Arts and Science, Coimbatore, India Assistant Professor, Dept of IT, Dr. N.G.P College of Arts and Science, Coimbatore, India Assistant Professor, Dept of IT, Dr. N.G.P College of Arts and Science, Coimbatore, India Assistant Professor, Dept of IT, Dr. N.G.P College of Arts and Science
Abstract: Electronics and computational techniques are increasingly being used to analyze biological cells to diagnose diseases and develop methodologies to cure diseases inside the body. One such technology is „Nanotechnology‟. The paper emphasizes on the best and effective utilization of Nanotechnology in the treatment of cancer. The design of nanodevice is based on the constant study of cancer cells and nanotechnology. The nanodevice is injected to the patient which can travel through blood vessel, identify and destroy cancer cells. The system is fully automated whereby the device manages to move to the affected cells through certain algebraic calculations automatically wherever it might be placed. This would be loaded into a simple microprocessor like 8085 and can be embedded along with the nanodevice for automatic discovery of cancer cells. Manual guidance and monitoring is done to control the device explicitly, further more command signals are activated automatically or manually to destroy the affected cells through RF signals. The theme is based on the fact that the cancer cells get destroyed on exposure to RF signals, due to high heat generation. In our paper we design a device that contains sensors, transceivers, motors and a processor which are made up of biodegradable compound. No more destruction of healthy cells due to harmful toxins and radiations generated through chemotherapy and radiation therapy.
A survey based on Video Shot Boundary Detection techniques
NIKITA SAO, RAVI MISHRA ME Scholar, Department of ET&T, SSCET, Bhilai, India ME Scholar, Department of EEE, SSCET, Bhilai, India
Abstract: Processing of video and image provides an understanding of the scene that it describe. It is an essential component of a number of technologies including video surveillance, robotics and multimedia. It represents an area of research with huge growth in the recent past. Video shot boundary detection is one of the research works in the field of video processing. Many researchers are trying to put forward different algorithm in this respect. Here we present a brief literature survey that depicts the work done till date.
Hybrid Routers for Wireless Network on Chip (Noc) Design
SELVAKUMAR.V, AJAY.V.P PG Scholar, M.E.,VLSI DESIGN, KPR Institute Of Engineering And Technology, Coimbatore, India Assistant Professor, ECE Department, KPR Institute Of Engineering And Technology, Coimbatore, India
Abstract: The design of more complex systems becomes an increasingly difficult task because of different issues related to latency, design reuse, throughput and cost that has to be considered while designing. In Real-time applications there are different communication needs among the cores. When NoCs (Networks on chip) are the means to interconnect the cores, use of some techniques to optimize the communication are indispensable. From the performance point of view, large buffer sizes ensure performance during different applications execution. But unfortunately, these same buffers are the main responsible for the router total power dissipation. Another aspect is that by sizing buffers for the worst case latency incurs in extra dissipation for the mean case, which is much more frequent. Reconfigurable router architecture for Noc is designed for processing elements communicate over a second communication level using direct-links between neighbouring elements. Several possibilities to use the router as additional resources to enhance complexity of modules are presented. The reconfigurable router is evaluated in terms of area, speed and latencies. With the reconfigurable router it was possible to reduce the congestion in the network, while at the same time reducing power dissipation and improving energy.
Keywords: Buffer, Latency, Network on chip, reconfigurable router, Throughput
KIRAN DESHMUKH, AARTI BHAGURE, PROF. ZAFAR UL HASAN, PROF. ANIL R.AUTI, PROF. YOGESH R NAGARGOJE Student, CSE Department, Savitribai Phule Womens Engineering College, Aurangabad, India Student, CSE Department, Savitribai Phule Womens Engineering College, Aurangabad, India Assistant Professor, Department of Computer, SITRC Nashik, India Assistant Professor, Department of Computer, Dr. Seema Quadri Institute of Tech, Aurangabad, India Assistant Professor, CSE Department, Savitribai Phule Womens En
Abstract: We present and evaluate a new technique for detecting resource leaks in programs with dynamic memory allocation. A resource leak refers to a type of resource consumption in which the program cannot release resources it has acquired. Typically the result of a bug, common resource issues, such as memory leaks, often only cause problems in very specific situations or after extensive use of an application. To verify the effectiveness of the patterns, experiments are given to use them to detect real resource leaks in large open source projects. After you check your program for threading and memory errors and it is clean, if you still have an intermittent failure that you cannot quite track down, it could be caused by a resource leak.
Keywords: Such as, Detecting Resource Leaks in Java Program, Handling errors.
Bandwidth Enhancement and Circular Polarization of MSA Using Partial Ground Plane Technique
MOHD JAFFER ALI, MOHD SAIFUDDIN ASHRAF, MOHD SHAHRUKH KHAN, J PRASANTH KUMAR, M.A.RAHEEM Department of Electronics and Communication Engineering, Muffakham Jah College of Engineering and Technology, Hyderabad, India
Abstract: Volunteer Computing allows individuals to provide their computing resources voluntarily to a community working towards a common goal. Therefore, universities and research institutions can use Volunteer Computing to pool their underlying computing infrastructure into a High Performance Computing (HPC) Cloud, which can later be used to deploy virtual HPC clusters on demand. These virtual HPC clusters allow researchers and scientists to run computationally large parallel applications in the HPC Cloud, which can elastically grow and shrink as per the requirements, at minimal costs. In this paper, we discuss a mechanism that can generate virtual HPC clusters on demand in the Cloud from the pooled Volunteer Computing resources.
Keywords: Cloud Computing; High Performance Computing; Cluster as a Service; HPC as a Service; Volunteer Computing
Deployment of Virtual HPC Clusters on Demand from Volunteer Computing Resources
L.RAHUL, K.SHARAVANA MTECH, CSE, MVJCE, Bangalore, Karnataka, India Associate Professor, CSE, MVJCE, Bangalore, Karnataka, India
Abstract: Volunteer Computing allows individuals to provide their computing resources voluntarily to a community working towards a common goal. Therefore, universities and research institutions can use Volunteer Computing to pool their underlying computing infrastructure into a High Performance Computing (HPC) Cloud, which can later be used to deploy virtual HPC clusters on demand. These virtual HPC clusters allow researchers and scientists to run computationally large parallel applications in the HPC Cloud, which can elastically grow and shrink as per the requirements, at minimal costs. In this paper, we discuss a mechanism that can generate virtual HPC clusters on demand in the Cloud from the pooled Volunteer Computing resources.
Keywords: Cloud Computing; High Performance Computing; Cluster as a Service; HPC as a Service; Volunteer Computing
Yet another way of Ranking web Documents Based On Semantic Similarity
VIDYA KANNAN, DR. G.N.SRINIVASAN Department of Information Science and Engineering, RV College of Engineering, Bangalore, India
Abstract: In today’s web enabled world, searching for relevant information on web has been an important topic of research. Semantic similarity aims at providing robust tools for standardizing the content and delivery of relevant information across communicating information sources. Most of the times the user gets lots of irrelevant data as a result of poorly implemented search process. To avoid this, a ranking scheme is proposed, which provides the search result- set according to the better understood and correctly interpreted user query. This is done by considering the relevance of the query by keeping the user view in mind and also the semantics of the document and the user query. The simple lexical and/or syntactical matching usually used by search engines does not extract web documents to the user expectations. The proposed solution provides the most relevant data to user ranked in their relevance. The proposed ranking scheme for the semantic web search engine functions by finding the semantic similarity between the information available on the web and the query which is specified by the user. This approach considers both the syntactic structure of the document and the semantic structure of the document and the query. The objective of this paper is to demonstrate that a semantic similarity based ranking scheme will provide much better results than those by the prevailing methods. In this Paper an algorithm will be implemented that provides ranking scheme for the semantic web documents by finding the semantic similarity between the documents and the query which is specified by the user. The algorithm considers both syntactical and semantic similarities of the query and categorizes the search results based on the most probable and most appropriate interpretation of the query based on various interpretations taking into account all the words and their combinations in the query.
Fuzzy Logic Implementation of Antcolony Based Clusterhead Selection Algorithm
SWATI ATRI, DR. NASIB SINGH GILL, JAIDEEP ATRI M.Tech., Department of Computer science and Application, MDU, Rohtak, India Professor, Department of Computer Science and Application, MDU, Rohtak, India Research Scholar, Department of Computer Science and Application, KU, Kurukshetra, India
Abstract: In the mobile Ad hoc networks (MANETs) the mobility of nodes is one the important factor that needs to be taken care and hence there has to be a certain way to determine the relative location of any node and thus the cluster based algorithm provides one of the best solution to this problem. The fuzzy logic approach provides us the method to find the degree of truthness and hence can be best used to test the solution on the tool like MATLAB. In this paper proposed ABC (Antcolony Based Clusterhead) Selection algorithm have been testified based on the fuzzy logic on the MATLAB tool .This cluster formation algorithm provides us with a way to determine the node to be selected as a Clusterhead with in a cluster through the use of Ant colony optimization (ACO). The probability function designed in the paper helps in determining the probability for various nodes to be selected as a cluster head.
RAHTAP Algorithm for Congestion Control in Wireless Sensor Network
ASHISH KUMAR LUHA, VENGATTRAMAN T, SATHYA M Department of Computer Science, Pondicherry University, Puducherry, India
Abstract: Wireless sensor network (WSNs) can be constructed as an intelligent, large autonomous instrument for scientific observation at fine temporal and spatial granularities and over large areas such as environmental monitoring. WSNs typically operate under light load and suddenly become activate in response to a detected or monitored events. Depending on the application this can result in the generation of a large, sudden, and correlated impulse of data that must be delivered to a small no of sinks without disrupting the performance of the sensing application. This generation of data packets is usually uncontrolled and often leads to congestion. There are two techniques by which congestion can be reduced which are: either by reducing the data sending rate of source or by providing extra resources. Congestion in WSNs is high if load in the network is high. So network load is reduced upon elimination of redundant number of packets in WSNs. In this paper we implement Redundancy Aware Hierarchical Tree Alternative Path (RAHTAP) algorithm which eliminates the duplicate packets from the network and achieve reduction in network load as per packets basis which create dynamic alternative path from source to sink when congestion on a particular node. This algorithm works over the thought of existing congestion control algorithm HTAP. We use here QualNet Simulator to mimic the consequence which demonstrates RAHTAP is a proficient calculation and straightforward solution for confronting over-burden circumstance in WSN in examination with HTAP.
Keywords: Wireless Sensor network, Congestion control, Alternative path routing, Energy efficiency.
TRILOK GUPTA, ARCHANA SHARMA Pacific Academy of Higher Education and Research University, Udaipur, Rajasthan-India, Associate Professor, Department of Computer Science, Gurukul Institute of Engineering & Techchnology Institutional Area, Ranpur, Kota, Rajasthan-India
Abstract: Today the main source of an information system is search engine. With the rapid development of Internet, network information sweeping the globe, produced a large amount of text, images, multimedia, and other forms of electronic information resources. This paper describes in detail the basic tasks a search engine performs. An overview of how the whole system of a search engine works. It provides and focuses on the structure of the retrieval system and to improve the performance, efficiency of the retrieval system, to speed up the inspection speed, and constantly adapt to the development of network information.
Keywords: World Wide Web, Web searching, Search engines, Web Crawlers, Indexing, metadata.
A Survey on Medical Data Mining for Periodically Frequent Diseases
MOHAMMED ABDUL KHALEEL, SATEESH KUMAR PRADHAN, G.N.DASH Research Scholar, Sambalpur University, India Post Graduate department of Computer Science, Utkal University, India Post Graduate, Department of Physics, Sambalpur University, India
Abstract: Medical data mining is the field of research pertaining to health care domain which helps in capturing latent relationships among attributes. This kind of knowledge discovery in modern world has become indispensable as clinical data is very huge and manual interpretation is not possible. Mining transactional databases containing medical data has plethora of real world utilities such as medical diagnosis, expert decision making and so on. Medical data mining also helps in promoting evidence based research that is essential and suitable for health care industry. Though there are many areas of research in medical data mining, in this paper, we focus on the data mining approaches or methods that help in finding periodically frequent diseases. A pattern which occurs at regular time intervals is said to be periodically-frequent. Periodic frequent pattern discovery can help people concerned to make well informed decisions. Towards this end, we analyze various methods that are used in medical data mining for discovering actionable knowledge pertaining to periodically frequent diseases.
Keywords: Data mining, medical data mining, frequent patterns, periodically frequent diseases
THAKARE PRIYANKA, NIKAM PRIYA, YANDE AARTI, RATHOD SHRADDHA, PROF. M.A.KHAN Student, CSE Department, Savitribai Phule Women’s Engineering College, Aurangabad, India Student, CSE Department, Savitribai Phule Women’s Engineering College, Aurangabad, India Student, CSE Department, Savitribai Phule Women’s Engineering College, Aurangabad, India Student, CSE Department, Savitribai Phule Women’s Engineering College, Aurangabad, India Assistant Professor, CSE Department, Savitribai Phule Women’s Engine
Abstract: In this paper we will focus on Blogging platform for the member of organization. In this we can also implement the discussion forum. This platform can be used for any organization which will provide facility to configure personal website or Blog to each member. In today’s scenario we are having various options of the blogging platforms like WordPress, blogger few to say. But they are having various drawbacks like we can’t customize this software as per our need and also these website is not feasible to give special blogging environment for any organization.
Keywords: Blog, Organization, Web Syndication, WordPress, Drupal, Serendipity
Performance of Integrated Heterogeneous Network (WLAN-SGSN AND WLAN-GGSN)
DEEPAK KUMAR, ANURAG JOLLY, S. NANDA KUMAR B.Tech Student, Electronics and Communication VIT University, Vellore, India B.Tech Student, Electronics and Communication VIT University, Vellore, India Asst. Professor (Sr), Electronics and Communication VIT University, Vellore, India
Abstract: To facilitate end user with high bandwidth data services different architectures has been proposed. Previous studies shows loose coupling has worst performance i.e. connecting WLAN to IP backbone directly. For high bandwidth application tight coupling integration of UMTS-WLAN is the efficient way, there are two way to form tight coupling i.e. connecting WLAN with either SGSN or GGSN. Both the technique is far better than loose coupling. Architecture for WLAN-SGSN and WLAN-GGSN are developed and analyzed. The simulated result on OPNET Modeler 14.0 reveals for high bandwidth data services, integration of WLAN-GGSN is best as it has minimum packet lose, better response time and goods QoS (Quality of Service).
A High-Speed Pipelined Design for CRC-8 ATM-HEC circuit and a Comparative Study with its Parallel and Serial counterparts
AVIPSA S.PANDA, GANESH L.K.MOGANTI Student, School of Electronics, KIIT University, Bhubaneswar, India Asst. Prof., School of Electronics, KIIT University, Bhubaneswar, India
Abstract: The Cyclic Redundancy Check (CRC) can be termed as a “sophisticated check sum”. The Linear Feedback Shift Registers (LFSRs) play a key role in the calculation of the CRC. A simple circuit based on LFSR performs the CRC calculation by means of managing one bit at time. The CRC circuit design can be proposed by implementation of serial design or parallel or pipelining. This paper puts forth the comparison results of all the three design possibilities of CRC-8 ATM HEC.
Keywords: Cyclic Redundancy Check, Pipelining, CRC-8, Serial CRC, Parallel CRC.
SMS Security for Android Mobile Using Combine Cryptographic Algorithms
POONAM MANDAVKAR, GAURI PATIL, CHETNA SHETTY, VISHAL PARKAR Student, Computer, Rajendra Mane College of Engineering &Technology, Ambav, India Student, Computer, Rajendra Mane College of Engineering &Technology, Ambav, India Student, Computer, Rajendra Mane College of Engineering &Technology, Ambav, India Assistant Professor, Computer, Rajendra Mane College of Engineering &Technology, Ambav, India
Abstract: This work relates to an alternative solution that provides a peer-to-peer SMS security that guarantees provision of confidentiality, authentication, integrity and non-repudiation security services. Short message service (SMS) is a very popular and one of the easy to use communication technology for mobile phone devices. Originally, this service was not designed to transmit secured data, so the security was not an important issue during its design. Yet today, it is sometimes used to exchange sensitive information between communicating parties. A combined cryptographic scheme has been used which is combination of the Diffie Hellman Key Exchange, PBE, SHA and AES algorithms to achieve more robust functionality. For implementation, Android SDK has been developed in Android to introduce a required security services for SMS. The developed application is tested on real equipment such as a device supported to Android 2.2 version. It is able to achieve all the required cryptographic operations completely on the users‟ mobile phone in less than one second for each operation, and thus the mobile phone performance still remains effective.
Keywords: SMS Security, Combine Cryptographic Algorithms, Android, confidentiality, authentication, integrity and non repudiation.
3-D Difference Histogram Modification for Reversible Data Hiding
MEERA K, MANU G THOMAS M. Tech Student Computer Science, Jawaharlal College of Engineering and Technology, Calicut University, India M.E, Computer Science and Engineering, Annamalai University, Chidambaram, India
Abstract: 3-Dimensional Difference Histogram Modification for reversible data hiding is a technique, in which a reversible data hiding scheme is proposed by using difference-pair-mapping for 3-d images. For each pixel pair, it calculate the differences of neighbouring pixel values and select some difference numbers for difference expansion.. Then, a three-dimensional difference-histogram is generated. Finally, reversible data embedding is implemented according to the improved Difference Pair Mapping and LSB method. In 3-d Difference Histogram Modification for Reversible Data Hiding, a separable reversible data hiding is implemented. The LSB algorithm is improved to RGB- LSB algorithm for 3-d images. The image redundancy can be better exploited and an improved embedding performance is achieved by this approach. A pixel-pair-selection strategy is also adapted to use the pixel-pairs located in smooth image regions to embed data. This can further enhance the embedding performance.
Performance Analysis of Transport Control Protocol for Cognitive Radio Ad Hoc Network
DIVYA K, NISHA D, SURYA M PG Student, ECE Department, Sriguru Institute of Technology, Coimbatore, India PG Student, ECE Department, Sriguru Institute of Technology, Coimbatore, India Assistant Professor, ECE Department, Sriguru Institute of Technology, Coimbatore, India
Abstract: A Cognitive radio (CR) network is an intelligent radio network that can be programmed and configured dynamically. It allows users to opportunistically transmit in the Primary User’s spectrum bands without any interference. Relevantly, frequent sensing of the spectrum and spectrum availability variation with time by the CR users has an effect on the OSI layer protocol performance, especially at the transport layer. This paper investigates the drawbacks of TCP newReno in a CR ad hoc network environment, and put forwarded TCP CRAHN. This approach also includes incorporating spectrum awareness by a combined method of explicit feedback from the intermediate nodes and the receiver node. During the quality of being mobile of unlicensed users there occurs a scheduling problem which increases the delay. So, a scheduling algorithm is being introduced to reduce the delay and enhanced the throughput.
Efficient Gray Image Compression using Modified JPEG 2000 Standard
AMAN CHANDRAKAR, RAMKISHAN DEWANGAN P.G.Student, Department of CSE, CSIT durg india Assistant Professor, Department of CSE, CSIT durg india
Abstract: The rapid growth of digital imaging applications, including desktop publishing, multimedia, teleconferencing, and high definition television (HDTV) has increased the need for effective and standardized image compression techniques. Lots of techniques are available for the Single channel image compression. i.e. for gray images. For still image compression, the “Joint Photographic Experts Group” or JPEG standard has been established by ISO (International Standards Organization) and IEC (International Electro-Technical Commission). Since then lots of work had been done on single channel image compression mostly based on JPEG compression. But rapid growth in modern communication demands the direct transmission and storage of images with higher compression ratio and less mean square error (RMSE). The available JPEG standard can able to provide smaller root mean square error but not able to generate higher compression ratio. This arises the need of image compression techniques which can able to keep RMSE within an allowable range and simultaneously able to generate higher compression ratio (CR). This paper brought forward a mathematical modification on available JPEG 2000 image compression algorithm so that it can able to provide higher compression efficiency with allowable error rate.
Keywords: Single channel image compressions, JPEG 2000 standard, mean square error (MSE), compression ratio (CR).
Hierarchical and Partitioning Clustering Algorithms for Detecting Outliers in Data Streams
DR. S.VIJAYARANI, MS. P.JOTHI Assistant Professor, Department of Computer Science, School of Computer Science and Engineering, Bharathiar University, Coimbatore, Tamilnadu, India M.Phil Research Scholar, Department of Computer Science, School of Computer Science and Engineering, Bharathiar University, Coimbatore, Tamilnadu, India
Abstract: The data stream is a new arrival of research area in data mining where as data stream refers to the process of extracting knowledge structures from unlimited and fast growing data records. Future applications involved in data streams are motivated by many researchers involving continuous and massive data sets such as telecommunication system, customer click streams, ecommerce, meteorological data, network monitor, stock market and wireless sensor network. For handling this type of stream data, the recent data mining methods are not sufficient and equipped to deal with them, for this reason it leads to a numerous computational and mining challenges due to shortage of hardware limitations. Nowadays many researchers have focused on mining data streams and they proposed many techniques for data stream classification and clustering, as well as mining frequent items from data streams. Data stream clustering and outlier detection provides a number of unique challenges in evolving data stream environment. Data stream clustering algorithms are highly used for detecting the outliers in efficient manner. The main purpose of this research work is to perform the clustering process and detecting the outliers in data streams. In this research work, two types of clustering algorithms namely BIRCH with K-Means and CURE with K-means is used for finding the outliers in data streams. Two performance factors such as clustering accuracy and outlier detection accuracy are used for observation. Through examining the experimental results, it is observed that the CURE with K-Means clustering algorithm performance is more accurate than the BIRCH with K-Means algorithm.
Keywords: Data stream, Data stream Clustering, Outlier detection, CURE, K-Means, BIRCH
NIHARIKA SANGANI, PRAVIN NAWALE, KALPESH JETHWA, CHIRAG GOSALIA Student, BE Computers, K.J.Somaiya College of Engineering, Mumbai, India
Abstract: Network Intrusion Detection is an important technology in business sector as well as in high security zones such as research. It is an effective weapon that provides information security. A Network Intrusion Detection System is used to monitor networks for attacks or intrusions and report these intrusions to the administrator in order to take appropriate action. Computers that form networked distributed systems, may span multiple buildings sometimes located thousands of miles apart. The network of such a system is a pathway for communication between the computers in the distributed system. The network is also a pathway for intrusion. This system is designed to detect some common attacks (i.e. SYN Flooding and IP spoofing in this case) on network systems. It follows the signature based IDs methodology for ascertaining attacks. A signature based IDS will monitor packets on the network and compare them against a signatures or attributes from known malicious threats. It has been implemented in Java with help of JPcap Library. In this system the attack log displays the list of attacks to the administrator for evasive action. This system works as an alert device in the event of attacks directed towards an entire network.
Keywords: NIDS, malicious, legitimate, attacks, signature, SYN flood, IP Spoofing.
Design And Enhancement of Gain & Bandwidth Of Rectangular Patch Antenna Using Shifted Semi-Circular Slot Technique
PAMPA DEBNATH, SOHINI PAL, AMRITA MAITY, RIYA BHATTACHARYYA, KRISHNA MAHATO Assistant Professor, Department of Electronics & Communication Engineering, RCCIIT, Kolkata, India Student, Department of Electronics & Communication Engineering, RCCIIT, Kolkata, India Student, Department of Electronics & Communication Engineering, RCCIIT, Kolkata, India Student, Department of Electronics & Communication Engineering, RCCIIT, Kolkata, India Student, Department of Electronics & Communi
Abstract: Microstrip Antennas are strongly used in wireless communication applications. This paper proposed a rectangular patch antenna loaded with a semi-circular slot to operate at 5.25 GHz with moderate gain (about 8.53dBi), bandwidth (96.7 MHz) and a good matching( S11=-24.13dB).This paper also describes the increment in Bandwidth and Gain of Rectangular Microstrip Patch antenna with the Slot. Microstrip patch antenna is designed on a Duroid 5880 substrate with a dielectric constant of 2.2. The results of both the designs with and without slots are compared and it was found that an increase in the bandwidth by33.82% and gain by 28.25% are being achieved. The antenna is designed based on extensive HFSS simulation studies.
Simulation and Analysis of Puncturing in Turbo Code using MATLAB
JITENDRA PRAKASH SHREEMUKH, PROF. (DR.) B.S.RAI Department of Electronics and Communication Engineering , Madan Mohan Malaviya University of Technology, Gorakhpur, India
Abstract: In this paper, we proposed some selection criteria for the puncturing vector to achieve excellent performance in terms of BER and gives useful guideline for design of puncturing vector based on simulation result. In this paper, we have compared the performance of turbo code for different puncturing location for two parity branches. Punctured turbo codes may show poor performance due to uneven error protection of input bits after puncturing. The focus of the work is on understanding and design of Punctured Turbo codes. This includes through investigation of central components that influence Turbo code performance, such as encoders and the interleaver. The investigations are carried out for transmission on additive white Gaussian noise channels. For our simulation size of interleaver selected is 1024*1024 and keeping the number of iteration 6. Simulations are conducted on MATLAB at maximum SNR range of 6 dB. In addition we also simulate the performance of punctured turbo codes with increasing the number of iteration and its effect on the performance is analyzed.
Evolving E-Governance through Cloud Computing based environment
VIKRAM JEET SINGH, ASHWANI CHANDEL Research Scholar, Department of Computer Science, Himachal Pradesh University, Shimla, India
Abstract: The introduction and continuous development of information and communication technologies has made governments across the globe realize their potential benefits. Although the computerization of departments has enhanced the efficiency with which information is handled and processed, it comes at a large cost in terms of infrastructure, skilled personnel and user reluctance. Whenever there is a change or update in technology, there arises a major need to update the infrastructure, skill set as well as the user perspective. Its not always possible to carry out such hugely expensive changes every time there is a technology update. Leaving aside the under-developed ones, even the developed countries would not afford to risk their resources for such tasks every now and then. In this paper, we take up the issue from a cloud based computing perspective and propose a cloud framework for the Indian National e- Governance Plan (NeGP) to ensure interoperability functionality among different states and to see the benefits such as - reduce the operating costs, provide greater reliability, transparency and sustainability while using latest technologies.
Attaining an Efficient Coherent Optical OFDM System
N.SANGEETHA, K.P.NITHIN, M.AAKASH Assistant Professor, ECE, VIT University, Vellore, India Student, ECE, VIT University, Vellore, India Student, ECE, VIT University, Vellore, India
Abstract: Coherent optical OFDM (CO-OFDM) is a promising technology for the next-generation optical transmission systems beyond 100 GB/s which has been proposed recently and its implementation has shown extreme robustness against chromatic dispersion and polarization mode dispersion. The proposed synchronization method provides better results when compared with Schmidl, Minn and Park’s methods in terms of timing and frequency offset estimation. Since CO-OFDM is sensitive to noises, channel estimation plays an important role in detecting baseband data from the received signal. A DFT based channel estimation technique is proposed which gives a better performance when compared to conventional LS and MMSE methods.
AVANTIKA SINGH, SUKHWINDER SINGH Student, Electronics and Communication Engineering Department, PEC University of Technology, Chandigarh, India Mentor, Assistant Professor, Electronics and Communication Engineering Department, PEC University of Technology, Chandigarh, India
Abstract: In computer networking, cloud computing refers to the connection of several computers connected over the internet for service utility, which acts as a pool of virtualised computer source. It is a means of running a same program at the same time over a number of connected computers. The basic foundation is service oriented architecture and virtualisation of hardware and software. A cloud is able to host different workloads and it allows workloads to be deployed/scaled-out on-demand by rapidly providing virtual or physical machine, redundancy, self-recovering, highly- scalable programming models and allowing workloads to recover from hardware/software failures and rebalance allocations. The technology faces several significant challenges and the current research focuses on the technical issues that arise when building and providing clouds and the implications on enterprises and users.
Keywords: Cloud computing, cloud technologies, review, project, clouds, and technology.
GARIMA ARORA, SANJEEV DEWRA M. Tech Scholar, Department of ECE, Shaheed Bhagat Singh State Technical Campus, Ferozepur, India Assistant professor & Head of ECE Department, Shaheed Bhagat Singh State Technical Campus, Ferozepur, India
Abstract: In this paper the transmission performance of 32 × 10 Gbps with 0.8 nm channel spacing dense wavelength division multiplexed system using hybrid optical amplifiers (RAMAN-EDFA, RAMAN-SOA AND EDFA-SOA) has been investigated. The performance has been compared at different distances and has been evaluated on the basis of Quality factor, optical output power, bit error rate and average eye opening. It is observed that maximal transmission distance of 224 Km is achieved in case of RAMAN-EDFA whereas in RAMAN-SOA and EDFA-SOA hybrid amplifiers the signal can travel up to maximum distance of 218 and 211 Km with acceptable Quality Factor and Bit Error Rate respectively. The RAMAN-EDFA hybrid optical amplifier also provides the highest output power of 14.205 dBm and minimum bit error rate of 1.96e-10 at 224 Km.
Performance of Spectrum Sensing over Fading Channels and an Energy Efficient Cooperative Spectrum Sensing Scheme for Cognitive Radio
VISWANATHAN RAMACHANDRAN, ALICE CHEERAN Electrical Engineering Department, Veermata Jijabai Technological Institute, Mumbai, India
Abstract: Cognitive Radio (CR) is a radio communications and networking technology that has recently attracted considerable interest from academia as well as industry worldwide. It follows the design philosophy of Dynamic Spectrum Access (DSA) as opposed to a fixed spectrum allocation policy. The enabling technology for CR is spectrum sensing, which is the inference of presence/absence of primary users (PU) in a given spectral band. Spectrum sensing is complicated by the fading effects of wireless channels, which necessitates CRs to collaborate with one another to make sensing results robust. Another aspect that must be considered in practical CR networks is the energy efficiency of the spectrum sensing process, due to the recent emphasis on 'Green Wireless'. This paper first evaluates the performance of spectrum sensing over different fading channels and shows how collaborative sensing improves robustness. Subsequently, the paper considers an improvement to current techniques for energy efficient spectrum sensing by employing techniques from the field of Compressed Sensing (CS).
Keywords: Cognitive Radio, Spectrum Sensing, Energy Detection, Cyclostationary Feature Detection, Energy Efficiency, Compressed Sensing
TONDARE S.M, PANCHAL S.D, KUSHNURE D.T Assistant Professor, Electronics and Telecom Dept., Sandipani Technical Campus Faculty of Engg, Latur(MS), India Assistant Professor, Electronics and Telecom Dept., Sandipani Technical Campus Faculty of Engg, Latur(MS), India Assistant Professor, Electronics and Telecom Department, VPCOE, Baramati(MS), India
Abstract: The journey from analog based first generation service (1G) to today’s truly broadband-ready LTE advanced networks (now accepted as 4.5G), the wireless industry is on a path that promises some great innovation in our future. Technology from manufacturers is advancing at a stunning rate and the wireless networking is tying our gadgets together with the services we demand. Manufacturers are advancing technologies at a stunning rate and also evolution in wireless technology all impossible things possible as market requirement.
Keywords: Mobile Wireless Communication Networks, 1G, 2G, 3G, 4G,4.5G
Efficiency Comparison of Multilayer Perceptron and SMO Classifier for Credit Risk Prediction
LAKSHMI DEVASENA C Assistant Professor, Operations & IT, IBS Hyderabad, IFHE University, Hyderabad, India
Abstract: Credit Risk Prediction is an important task in any Banking Industry. Identifying the defaulter before giving loan is a crucial task of the Banker. Classification techniques are used to classify the customer, whether he/she is a defaulter or a genuine customer. Determining the best classifier is a critical assignment for any industrialist. It leads to instil different research works for determining the best classifier for the credit risk prediction. This paper analyzes the efficiency of Multilayer Perceptron Classifier and Sequential Minimal Optimization (SMO) Classifier for the credit risk prediction and compares their efficiency through various measures. The German credit data is taken for credit risk prediction and the classification experiment is done using open source machine learning tool.
