← Back to VOLUME 2, ISSUE 5, MAY 2013
This work is licensed under a Creative Commons Attribution 4.0 International License.
Performance Comparison between Optical and Copper Interconnects
MAHESH KUMAR, KARAMJIT SINGH SANDHA Student, M.E. ECE, Thapar University, Patiala, India Asst. Professor Dept. of E.C.E., Thapar University, Patiala, India
Downloads: Download PDF
π 40 viewsπ₯ 0 downloads
Abstract: This paper gives performance comparison between optical and copper interconnects in terms of delay for global interconnect level. As the technology is scaled down, device dimensions have been shrunk on the chip, the conventional copper interconnects are not able to fulfil different design requirements. The optical interconnects can be considered as a substitute for copper interconnects. In this paper delay of optical and copper interconnects is simulated using SPICE simulation for different technology nodes at global interconnect length. The results of this paper show that optical interconnects give better results as compared to conventional copper interconnect for global interconnect length.
Keywords: Optical interconnects, copper interconnects, delay, technology nodes and CMOS.
Keywords: Optical interconnects, copper interconnects, delay, technology nodes and CMOS.
How to Cite:
[1] MAHESH KUMAR, KARAMJIT SINGH SANDHA Student, M.E. ECE, Thapar University, Patiala, India Asst. Professor Dept. of E.C.E., Thapar University, Patiala, India , βPerformance Comparison between Optical and Copper Interconnects,β International Journal of Advanced Research in Computer and Communication Engineering (IJARCCE)
This work is licensed under a Creative Commons Attribution 4.0 International License.