Abstract: Every automatic water distribution system (AWDS) fails partially or completely at some point or points during its lifetime. Measurement of reliability for a AWDS under various failure conditions is necessary. Numerous techniques have been developed for estimating AWDS reliability. It was found that types of failure (mechanical, hydraulic, and water quality failure) and techniques of reliability analysis are mixed together inappropriately. Water is the basic need of all living organism and human mankind, without water living is impossible. In recent days the rapid population growth causes insufficiency and wastage of drinking water which leads to scarcity of water and uneven distribution of drinking water. Next issue is that the supplied water is sucked more by individual home unit using suction pump which leads shortage of water to the remaining houses in the locality. In this paper a system has been mode led to overcome the above stated problems. The main aim of this paper is to distribute only required amount of water needed, thus ensuring there is no wastage and block in supply of water. In order to implement the proposed system each home unit must be provided with water flow sensor and water flow switch which is controlled by arduino mega board. Flow sensor generates series of electric pulse through which water utilize by the user, flow rate and the amount of water supplied can be calculated.
Keywords: Arduino Mega, Water flow sensor, Valve, Water flow switch, LCD.
| DOI: 10.17148/IJARCCE.2021.10819